| Content | 
Overview
- Spark's remote controller features a brand new Wi-Fi signal transmission system, capable of controlling the aircraft * and gimbal camera at a maximum transmission range of 1.2 mi (2 km).
- The remote controller can connect to a mobile device wirelessly and display a live video feed via DJI GO 4. Its folding clamps allow you to attach your mobile device securely. Maximum remote controller battery life is approximately 2.5 hours. ***
- The Spark remote controller is currently only compatible with Spark aircraft.
- The remote controller can only reach its maximum transmission distance (FCC) in wide open areas with no electromagnetic interference and at an altitude of around 120 meters.
- Maximum operation time should be taken for reference only.
Highlights
- Video transmission range of up to 1.2 mi (2 km).
- Top speed of up to 31 mph (50 kph) in Sport mode.
In the Box
- Spark - Remote Controller ? 1
Specifications
- Operating frequencies: 2.412-2.462 GHz, 5.745-5.825 GHz
- Max transmission distance (unobstructed, free of interference):
- 2.4 GHz: 1.2 mi (2 km, FCC), 0.31 mi (0.5 km, CE), 0.31 mi (0.5 km, SRRC)
- 5.8 GHz: 1.2 mi (2 km, FCC), 0.19 mi (0.3 km, CE), 0.75 mi (1.2 km, SRRC)
- Note: 5.8 GHz transmission is not available in some regions due to local regulations.Operating temperature range: 32?F to 104?F (0?C to 40?C)
- Built-in battery: 2970 mAh
- Transmitter power (EIRP):
- 2.4 GHz: 26 dbm (FCC), 18 dBm (CE), 18 dBm (SRRC)
- 5.8 GHz: 28 dbm (FCC), 14 dBm (CE), 26 dBm (SRRC)
- Operating voltage: 950 mA, 3.7 V
- Supported mobile device thickness: 6.5 mm-8.5 mm
- Max length: 160 mm
|
-
Why can I use Osmo Action in various outdoor action scenes?
Osmo Action was designed to perform well in dynamic scenarios. It is waterproof at depths of up to 11 meters and can work in environments with temperatures from -10 to 40 °C. Voice control makes it easy to shoot while in motion. With a wide range of accessories, you can even use Osmo Action in a wide range of sports and adventure settings.
-
Does Osmo Action overheat while using?
While Osmo Action will become warm during use, its dedicated ventilation area improves heat dissipation efficiency of the image processing chip by 16%, ensuring stable operation of the system.
-
Is it easy for the Osmo Action lens to become damaged?
Osmo Action is equipped with durable lens filter cap that effectively protects the camera lens. It is made of abrasion and dust-resistant glass with an anti-fingerprint and anti-oil/water coating that protects against liquids. This lens filter cap also effectively reduces lens glare, allowing you to shoot in bright conditions.
-
Videos from action cameras typically come with some image distortion. Is this the case with Osmo Action?
Because of the wide-angle lens, action cameras typically create image distortion. With Osmo Action, you can turn on the built-in Dewarp feature to correct distortion easily.
|
Whats new with the NAZA-M V2 :
- New attitude stabilization algorithm, provides better flight performance / maneuverability
- New flight control performance, provides better flight experience; (flight control is smoother, take‐off is easier)
- Support for Octo‐rotor
- One‐motor stopped still can land safely (Hexa‐rotor, Octo‐rotor)
- Automatic course deviation compensation, reduced the effects of magnetic disturbance; interference around the compass detection & warning
- Added IMU advanced calibration, error identification and warning, reduced the impact of sensor error to the flight performance
DJI has continued improving the Naza Flight Controller, the latest is the Naza M V2 which is the next exciting product to the market with the latest technology being integrated in to the new NAZA M V2. The basic functionality will remain the same as DJI NAZA V1, however there are a few new features.
The main controller hardware structure has been optimized and the expandability and performance of the flight control system has been enhanced further with new attitude stabilization algorithms, these provide better flight performance / manoeuvrability and a new level of flight control performance which provides a better flight experience; (flight control is smoother, take-off is easier). The Naza M V2 has support for OctoCopter and has the added safety feature on HexaCopter and OctoCopter should a motor stop working it can still be landed safely.
The Naza M V2 has automatic course deviation compensation, this reduces the effects of magnetic disturbance and interference around the compass, there is a warning on detection of magnetic disturbance. The IMU advanced calibration; error identification and warning reduce the impact of sensor errors in flight so increasing the overall performance.
The GPS unit added to the Naza M V2 will see great position holding and RTL features for additional safety. The V2 NAZA with the GPS unit will have IOC to help new and experienced pilots gain the most from their systems with easy orientation assistance while flying at greater distances.
Package Includes:
- Naza-M V2 Flight Controller
- Naza-m V2 GPS Module
- Power Management Module
- LED with USD interface
- Cables
| All-in-one Design DJI adheres to continuous innovation and improvement. With the new firmware, new attitude stabilization algorithm and optimized hardware structure, the Naza-M V2 provides better flight performance. The innovative All-in-one design simplifies installation and saves space and weight. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small Main Controller. It can measure flying altitude and attitude and therefore can be used for autopilot/automatic control. |
|
|
|
| Independent PMU with amazing function extension The Naza PMU V2 has enhanced BEC functionality and provides extendable CAN BUS ports, which can support iOSD, Zenmuse H3-2D gimbal (pitch control). Support is also included for optional Bluetooth LED module to allow parameter adjustment via a mobile APP (future firmware upgrade required for this functionality) |
|
|
|
| Advanced & Improved Attitude Stabilization Algorithm The latest fourth generation attitude stabilization algorithm not only inherits the outstanding flight stability of DJI products, but also provides excellent maneuverability even without the GPS module. It is more flexible and stable, and gives the hobbyists a wonderful flight experience. New features have been included such as GPS course automatic compensation, GPS & Compass sensor calibration, new take-off mode and so on. |
|
|
|
| Nine Types of Multi-rotors Supported Naza-M V2 now supports nine types of multi-rotor, which meets the different needs of the enthusiasts.
Quad I, Quad X;
Hexa I, Hexa V, Hexa Y, Hexa IY;
Octo X, Octo I, Octo V; ( Naza-M V2 does not support the aircraft which has large vibration, so when you choose to use hexa-rotor or octo-rotor, please use the vibration dampening devices accordingly. |
|
|
|
| Multiple Flight Control Modes/Intelligent Switching It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger. |
|
|
|
| GPS Module Available/Accurate Position Hold The plug and play GPS module will greatly enhance the performance for Aerial Photography with accurate Position Hold, Return-To-Home and Intelligent Orientation Control functionalities. With the GPS Module, the multi-rotor will have position and altitude locked accurately even in windy conditions. Hovering accuracy is approximately 2.5m horizontal and 0.8m vertical. |
|
|
|
| Intelligent Orientation Control
Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:
In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 1)：
In home lock flying, the forward direction is the same as the direction from home point to multi-rotor. See the following figures (Mode 2)： |
|
|
|
| Enhanced Failsafe Mode If your transmitter supports failsafe, then you can set failsafe through port-U. Naza controller has built-in auto level failsafe function, which means when the communication between MC and the transmitter is disconnected, the outputs of all command sticks from controller will go to center position. If the GPS module is used, you can also set RTH on failsafe. If your transmitter has only 4 channels, then MC will work in Atti. Mode by default without the failsafe function. |
|
|
|
| Two Levels of Low Voltage Protections In order to prevent your multi-rotor from crashing or other harmful consequences caused by low battery voltage, we have designed two levels of low voltage protection. You can choose not to use this, however we strongly recommend you to enable the protection. Both levels of protection have LED warning as default. The first level will blink the red light continuously; the second level will blink red light continuously and the multi-rotor will descend and land. In manual mode when low voltage protection is triggered the LED warning will be active only. |
|
|
|
| Motor Arm and Motor Dis-arm There are four ways to start the motors, see the following picture:
When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors.
Motor Disarm: There are two modes of Motor Disarm: namely Intelligent Mode and Immediate Mode. For more information, please refer to the user manual or DJI Wiki.
Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience in supporting double spring TX; every time you let go of the throttle stick it will hover. |
|
|
|
| PPM, S-BUS & Ordinary Receiver Supported Minimum Four channel receiver supported, also PPM and Futaba S-Bus receiver supported. PPM & S-Bus receivers (the general use of the first 8 channels of S-Bus receiver) to optimize the channel connection, the A, E, T, R, U five-channel functions are set using channel X2, use only one servo cable to connect the PPM or S-Bus to X2, this makes installation quick and easy. |
|
|
|
| Independent LED ModuleThe Independent LED module makes the indication of the flight status and the system status to the ground much clearer. The pilot can get information more quickly and more conveniently, even at night, he/she can get real-time flight information feedback through the LED flashing frequency and colour. In addition, the module has a USB interface, which is used for parameter settings and firmware upgrade. |
|
|
|
| Built-in Gimbal Stabilization FunctionThe gimbal stabilization module is compatible with almost all 2-axis gimbal systems. The system will adjust the gimbal and camera according to the attitude of the aircraft after setting the parameters the first time. |
|
|
|
| Multi-rotor One-power Output Fail ProtectionIn most conditions, the whole multi-rotor will retain good attitude and rotate around the frame arm with no power output, due to imbalanced mechanical structure and external environment. Rotating is mainly caused by payload and external environment. When payload is heavier, rotating speed is faster. On rotating, the hexa-rotor physical structure can cause rudder to become out of control. This humanistic protection function from Naza-M V2, in Attitude or GPS Mode, keeps attitude under control even with any one power output failed and highly reduces crash risk. |
|
|
|
| Remote Gain AdjustmentThe default parameter settings are preset for you to achieve a normal flight, and also supports remote parameter adjustment by using a control slider on the TX during flight in order to obtain better performance. |
|
|
|
| New Assistant Firmware Online UpdateThe user interface of the assistant software has been comprehensively updated and brings you a new interaction experience. Instructions will automatically appear which is very convenient. In addition, on the left side of each menu section there is additional information. The logical design makes your parameter settings more simple and convenient. Like other DJI products the Naza-M V2 firmware can be upgraded free online. |
|
|
- DJI Phantom 3 Advanced/ Professional OEM Gimbal Flat Ribbon Flexible Cable
- Engineered 100% DJI compatible with extra heavy power traces for higher performance
- High Quality, Tear Resistant Polyimide (PI) with immersion Gold Finger contacts
- Cable end stiffeners designed for easy insertion into PC board connectors for DIY installers
Compatible with only
-
- Phantom 3 Advanced Drone
- Phantom 3 professional Drone
Please Note that DJI has already stopped production of DJI Phantom 3 adv/pro drones and accessories. |
Overview
- Specially made for Spark's propellers. The propeller guards help reduce the risk of damage or injury. They are small, lightweight, easy to mount, and detach.
Highlights
- Covers the propellers.
- Aids flight safety, protecting people and objects from spinning propellers.
- Small, lightweight, easy to mount, and detach.
Tips
- Please make sure each propeller guard is mounted to the matching arm.
In the Box
- Propeller guards (pair) ? 2
Specifications
- Weight (single unit): 9.5 g
- Radius: 145 mm
- Installation circumference: 266?266?55 mm
| Compatibility
|
රු24,285.18
රු24,285.18
රු24,975.10
රු24,975.10
රු24,975.10
රු24,975.10
රු24,975.10
Reviews
There are no reviews yet.